-
INDUSTRY LEADING 3 YEAR WARRANTY
-
COMBO (SYMMETRICAL AND ASYMMETRICAL) ARM ASSEMBLY WITH ADJUSTABLE SCREW PADS!
-
CE CERTIFIED LIFT STRUCTURE AND HYDRAULIC SYSTEM – TESTED 115% DYNAMIC LOAD CAPACITY AND 150% STATIC LOAD CAPACITY
-
ONE SET OF 4″ TALL TRUCK ADAPTERS INCLUDED; 6’9″ LIFT HEIGHT MAXIMUM WITH TRUCK ADAPTERS
-
ALL ROBOT WELDED STRUCTURE WITH DURABLE POWDER COATED FINISH
APLUSLIFT HW-10KOH-A CAR LIFT (AUTO HOIST) IS ONE OF THE MOST AFFORDABLE OVERHEAD CAR LIFTS BUILT WITH QUALITY MATERIALS AND GOOD WORKMANSHIP. THE LIFT HAS A STRONG DOUBLE “S” COLUMN DESIGN TO SUPPORT 10,000 LB CAPACITY.
SPECIFICATIONS
- Overall Height: 143 3/16″
- Overall Width: 134 5/16″
- Maximum Lift height with Truck Adapters: 81″
- Maximum Lift height without Truck Adapters: 75″
- Minimum Height of Arm Top: 4.5″
- Drive Through Width (Carriage to Carriage): 100″
- Column to Column Width: 109″
- Column Cross Section: 11″L x 7″W
- Driving Mode: Dual hydraulic cylinders, chain drive
- Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
- Hydraulic Oil: 3-5 gallons AW32/AW46 (Not Included in the Package)
- Lifting Capacity: 10,000 LB
- Time to full rise: 50 sec
- Combo (Symmetrical and Asymmetrical) Arm Assembly
- Straight Front/Rear 3 Stage reach from 22 7/8″ to 42 5/8″
- Straight Rear 2 Stage reach from 33 5/8″ to 52 7/8″
- 4 Pieces of Adjustable Screw Pads Included
- 4 Pieces of 4″ Tall Truck Adapters (Height Extensions) Included
- Shipping Weight: 1,450 LB
- Shipping package size: 113″L x 22″W x 40″H
- Concrete Requirement: 6″ thick at 3500 psi reinforced with fiberglass or steel (4″ thick for vehicles 9000LB and below)
- 10 anchor bolts and 10 shims included
- Tool trays and toe guards included
- Column Steel Thickness: 13/64″
- Carriage Steel Thickness: 15/64″
- Carriage Yoke Thickness: 9/16″
- Arm Steel Thickness: 15/64″
- Base Plate Steel Thickness: 5/8″
FEATURES
- CE Certified Lift Structure and Hydraulic System
- Third party tested with a dynamic load capacity of 115%
- Third party tested with a static load capacity of 150%
- Durable hydraulic system
- Easy to operate and maintain
- Double point safety lock release
- Double Seal Rings Protecting PU Material
- Carriage Material Q355 (ASTM A572), Stronger Than Normal Q235 Steel
- Lifting operation by pressing “UP” button on motor
- Manual lowering operation by pressing lever
- Relief valve built in power pump to prevent overloading
- Automatic arm lock restraints
- Relief valve built in power pump to prevent overloading
- Door guards protection rubber
- Up-limit switch to protect cylinders working stroke used in safe length scope
- Heavy duty 3/8″ diameter cable and 5″ pulley that reduce high stress on synchronization process and increase cable life
- Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down
Hugh P. Kimball –
I recently purchased a store car lift, and I couldn’t be more satisfied with its performance! The build quality is outstanding, offering stability and durability that ensures both safety and efficiency. The lift operates smoothly and quietly, making it easy to elevate vehicles with precision.
Installation was straightforward, and the design allows for maximum space utilization, which is perfect for workshops or garages with limited room. The weight capacity is impressive, handling different vehicle sizes without any issues.
If you’re looking for a reliable, high-quality car lift, this is definitely a great investment. Highly recommended!
12moradazerty –
Best money spent in a while, had installed for a couple weeks now and already did an oil change, differential service, brake job, a tie rod end, a drag link, and two exhaust systems on two of my cars. Stuff I’ve been wanting to do for about a year but am just not motivated enough to work on my projects on a creeper lying down anymore. Can’t keep me away from hangin around my shop on weekends since I got this thing..
mlm021 –
Went together in one day. Definitely need a forklift for unloading. Works well so far.
jerr –
When all said and done I’m very happy with this unit. The instruction leave quite a bit to be desired though. Not sure if all of them are the same but the concrete anchors for this were 11/16 which was an oddball size and a few did not work even with anchor adhesive. I would suggest just upgrading to 3/4 anchors for a better sense of safety.
Milton –
This is a great lift. The over all quality is pretty good. The hydraulics and hoses are a much better quality than most I looked at. did a good job communicating with me via text prior to shipping out. You will need access to a fork lift or tractor for sure. While the assembly instructions were mostly understandable, one issue I ran into is there are a few steps that are fuzzy on how to complete. For example wiring the safety bar isn’t very clear. Also instructions didn’t show me where to install the racks/toe guards and the tool trays that go with them. I have included some pictures of how these should go. This should help anyone else that has issues ( I hope). Make sure to read completely through the instructions before you begin assembling. This will save you a ton of time and aggravation. This lift picks up my 3500 crew cab with no problem. Note that I have 5-1/2” reinforced concrete slab under it though. Over all I’m very happy with the lift.as a company has a good product for the price here. I would recommend this lift to any hobbiest and maybe even for a professional shop based on its use.
cepeda –
Easy to install with two able body people. All parts were there as needed and installation took about 5.5 hours not including installation of electrical power supply. I have lifted many 3/4 ton diesel trucks including mega cabs. Never any issues! Excellent value for the money.
Harland –
This is a great looking hoist for the price. Haven’t got the chance to try it out yet but setting up was pretty straight forward if you know a little of what you are doing. Instructions need to be a little more detailed. Posts came with some scratches but nothing too bad. Should work great!
Rhoades –
I wasn’t too sure at first because of the low price. Received it in about a week. Strongly built. Looks great and definitely doesn’t look or feel cheap. Lifted my car and SUV seamlessly. Doesn’t even feel like there is a car on it. Had one bolt missing and one small part broken. Liaised with Apluslift and got a response within hours. They sent replacement parts the next day. The only negative is what many mentioned, the instructions for assembly. I was able to figure it out and assembled it myself but many would probably be clueless on how to do it and what bolts and nuts to use just based on instructions provided. Tip: Look at the page on parts to figure what bolt goes where based on number. This being said, buy with peace in mind because it is a great lift for most needs!
1969 –
Easy to assemble, works great! I assembled it inside a building with the help of my farm tractor W/ front end loader by my self. The written instruction could have been better, but the pictures helped.